Specifications

Managing the Subscriber Database with ZbaseW
116 025-9034AA
Capcode
This filed is used to specify the capcode to used for a 5/6 tone pager. If a 5-digit number is
entered, then it is assumed that the battery saver feature is not used. If a 6-digit number is
entered, the first digit is used to select the battery saver function used.
Tone Series
(0 = EIA/USA, 1 = CCIR, and 2 = ZVEI)
This field selects the set of tone frequencies used by the pager, depending upon the
country of origin (see 5/6-Tone Format on page 206 in Appendix A for details).
Repeat
(0 to 3)
Provides redundant signaling tones for alerting reliability. The preamble tone is only sent
once. The message is only sent once.
0 = send tones once
1 to 3 = send tones 1 to 3 extra times
Send Empty Message
(Checked = Yes, unchecked = No)
Leave this check box blank to reduce the number of tone-only pages that a voice pager
receives. When you set this function to “No”, if a caller hangs up before the paging
terminal begins recording voice, no page will be sent. In practice, people reaching a wrong
number will often wait until after the beeps to hang up; thus some voice time will be
recorded (for example, the sound of a phone hanging up) and the pager will alert and send
it. Despite this, subscribers like this feature since it does help reduce false pages, so it
should normally be set to “No” for voice pagers.
This box should be checked if the subscriber wants a page even if no voice message is
given, or if you are setting up a tone-only (0 voice time) pager.
DTMF Pagers
Setting the Format field of the Status window to DTMF opens the following window.
Note To repeat both the paging tones and message, see the topic
Transmitter(s) on page 103.