Specifications

117
Format Windows
Capcode
(1 to 10 DTMF characters in length)
This field is used to enter the string of DTMF characters that are sent for this subscriber.
The string can be from 1 to 10 characters in length. Valid DTMF characters include 0
through 9, A through D, and the * and # characters.
Format
(S = Standard, K = Knox, or X = Knox Extended)
The Format field selects which one of three tone sets is used for generating the DTMF
characters. The Standard tone set is the one used almost everywhere in North America for
telephone signaling. The Knox and Knox Extended tone sets are included to support older
specialized paging decoders.
On Time in milliseconds
(40 to 2250, by tens)
This field sets the tone duration for each DTMF character transmitted during the page. All
of the characters are the same length. The period can be changed in increments of 10
milliseconds.
Off Time in milliseconds
(40 to 2250, by tens)
This field sets the gap between digits for the DTMF string transmitted. All of the gaps are
the same length. The period can be changed in increments of 10 milliseconds.
Send Empty Message
(Checked = Yes, unchecked = No)
Leave this check box blank to reduce the number of tone-only pages that a voice pager
receives. When you set this function to “No”, if a caller hangs up before the paging