Specifications

Call Accounting
132 025-9034AA
• 〈Number of display characters entered in Paging/Insure mode
• 〈Number of display characters entered in Mailbox/Notify mode
• 〈Total number of calls
• 〈Counter capacity for each field is 65,535 units.
• Overflow Protection — When counter capacity is reached, no more counts are
added to it, preventing “rollover.”
• ZbaseW Call Counts Commands
• 〈Get all current call counts.
• 〈Roll over call counts (current counts becomes old counts and all totals are
returned).
• 〈Display time and date the previous and current billing periods began.
Getting Counts from Series 2000
You can copy the call accounting information from the paging terminal to the office
computer by selecting the ZbaseW, Comm, Counts menu item. The available set of
options is then displayed in the status window as shown in Figure 5.
Click on Import Active Call Counts to get a copy of the active call accounting
information for all the subscribers. The active call counts continue to accumulate in the
paging terminal in nonvolatile memory.
Click on Rollover Call Counts and Import to get a copy of the active counts for all
subscribers and reset all of the call counters to zero. Typically, you do this at the end of a
billing period.
Note If a subscriber is internally call forwarded to another subscriber
ID#, a count of calls to the called number is kept in the Internal
Forward call count slot; in addition, all normal count values are
counted under the number forwarded to, not the number called.