Specifications

147
Add New Group
Figure 13: ZbaseW — The Edit, Groups Window
Add New Group
The easiest way to illustrate the Editing operation is by example, so we will assume we
have a new group to add to the database.
♦ Adding a new group call:
1. Press the New button and a fresh blank record will appear in the Group window.
2. In the Phone Number Called field, type the ID that you chose for the Group
Access in the Subscriber database and press Enter. If this is a new Group Access
the Group Access field will be filled in and the cursor will go to first Group ID
field. If this is an existing Group Access ID then the message “existing value -
record retrieved” will display below the “GROUP” window and the existing record
will be brought into the display.
3. You enter the IDs of all of the Group Members one by one into each field marked
with a number. You can enter as few as one group member or as many as 48
members. The group call pages are transmitted over the radio generally in the order
Note After you Edit the Subscriber or Group Database, be sure to
transfer these changes to the paging terminal using the Comm,
Update menu item. (See
Transfer Group Changes on page 149.)