Specifications

209
Subscribers File
“F 1”
• Flex: It is 7, 9, or 10 digits. For example:
“F 1234567”
“F 123456789”
“F1234567890”
• Golay: It is 6 digits. For example:
“G 123456”
• Multitone: It is 5 digits. For example”
“M 12345”
• POCSAG: It is 7 digits. For example”
“P 1234567”
• QuickCall1: It is 4 letters, and has a leading letter of ‘H’ because it shares the space
used by HSC (no longer supported). For example”
“H CMLP”
“H ?KN?”
QuickCall1 code replaces HSC code in the station card.
• SA206: It is always the following:
“M 00000”
The ZbaseW record for SA206 is an access portal, and the device address is
contained in the message, with all messages directed to one phone number in
ZbaseW via alpha paging. The leading letter of ‘M’ is used because the Multitone
code in the station card is replaced with SA206 code.
The following station card versions are available:
• Standard version supports 2-tone, 5-tone, Flex, Golay, and POCSAG.
• Multitone replaces Flex.
• SA206 replaces Flex.
• QuickCall1 and standard DTMF replace Flex.
• QuickCall1 and Knox DTMF replace Flex.
The following ascdat.exe versions are available:
• Supports 2-tone, 5-tone, Flex, Golay, and POCSAG.
• Supports 2-tone, 5-tone, Golay, and Multitone (SA206), and POCSAG.
• Supports 2-tone, 5-tone, DTMF, Golay, POCSAG, and QuickCall1.
Voice PROMPTS fields:
VWEL 119 1
VMSG 120 1
VSEFU 121 1
VTHANK 122 1
CPLPI 123 3
CPLMN 126 3
CPLA 129 3
Local transmitters TRANS-L fields:
P1CHAN 132 1
P1ZONE 133 2
P1REPEAT 135 2
P1DELAY 137 4
P2CHAN 141 1