Specifications

225
post
-r
Transfer office computer subscriber database changes in the
subs2000.chg file to the run time subscriber data file on the
paging terminal. The Zbase Comm Update menu item does this
command for you.
Added in version 310J0, this switch allows direct use of “.RET”
files. The correct format is:
+ post -r subs2000.ret
put filename
file1 file2
Put a copy of filename from office computer to paging terminal.
Put office computer file1 onto paging terminal and name it file2.
Full file path names can be used.
pword l password
p password
Password log onto paging terminal. Must do this command first
when ZlinkW-ing to paging terminal. Done automatically when
ZlinkW is run from Zbase.
The p option changes password. Must be done after logging on.
The correct way to change your password is to Edit Locations,
Zbase will then automatically issue this command, otherwise
Zbase will become confused.
q (or quit or “.”) Quit ZlinkW. The ESC key will do this also.
^R (Hold down CTRL key and press R key) Resets ZlinkW, thus will
cancel a put or get command that is in progress.
reboot Reboot the paging terminal. Stops all paging activity! It will be
several minutes until the paging terminal is taking pages again!
rename
(or ren)
old_spec new_spec The rename will change the name of a file or files. The original
name or names is given by old_spec, which may include a path
and may have wildcards in the filename in order to specify more
than one file. The new name is given by new_spec, as any path is
ignored just the new filename need be given. If the source and
destination names do not differ then an error message will be
displayed and no files will be affected.
After all files are processed the total number of files affected will
be printed.
repeat ZlinkW command
resume Batch file command (ZlinkW local command)
rmdir (or rd) directory Remove an existing subdirectory named “directory”.
sdb Display name of the active subscriber data file.
Command
Options/
Parameters
Action