Specifications

Pagesaver Menus

Notes On Beep Prompts

1. Beep prompts can be disabled on a per trunk basis.

2. A beep prompt can be left on for voice message prompting, while the three-beep

display message prompt is disabled.

Notes On Voice Prompts

1. Prompts to callers can be beeps or voice, depending upon whether the paging

terminal is equipped with a voice prompt option and the subscriber has voice

prompting turned on in the database. (See Voice Prompts on page 45.)

2. Voice prompt options are available as System Voice Prompts or Client

Personalized Prompts.

3. The caller can bypass a voice prompt by pressing a “*” key while the prompt is

playing.

4. A caller can enter a display page during a welcome or message prompt. There is no

need to wait for the three-beep prompt.

5. If the client has not recorded a Personalized Greeting, and Welcome = C in the

database, then the terminal plays the system voice welcome prompt and

appropriate message prompt(s).

Notes On PageSaver Database

1. Each client can have a different set of Message Modes available as enabled in the

subscriber database. (See Managing the Subscriber Database with ZbaseW on

page 55)

2. Each Message Mode has individual settings for PageSaver number of messages

and retention time.

Pagesaver Menus

(Available with PageSaver Option)

Clients access their PageSaver mailboxes from any Touch-Tone phone to retrieve

messages, erase messages, and record new greetings. The following information is useful

to clients, especially if printed on a wallet-sized card:

♦ To access PageSaver

1. Call your phone number

2. Press [0] when you hear your welcome (or during extra rings if call-forwarded)

3. Key in your 4-digit personal passcode