Specifications

49
Voice Command Chart
cleanest sound, be in a room without background noise. Some people have
professional announcers do these prompts. It is best to have Silence Compression
turned on (see Voice Storage System in Series 2000 Paging Terminals Installation
and Maintenance) and be quiet while holding your hand over the handset to let the
recording time out. The silence compression will trim the voice to just the right
length, eliminating any unused time at the end of the recording.
After the prompt has been recorded, you will hear five short beeps and the “Select
a voice prompt” prompt again. You may now play, record or delete a prompt, or
hang up if you are done.
Voice Command Chart
The Voice File Name shown in this table is provided as a reference.
Table 8: Voice Prompt Recording Commands
Command Number
Zetron Preferred Wording
Voice
File Name
Record Play Delete
300 Play all voice prompts —
001 301 601 System Welcome
“You have reached XYZ Communications.”
sys_welcome
002 302 602 Voice message
“At the tone, please speak your message.”
sys_vmsg
003 303 603 Display message *5
“At the tone, please key in your message.”
sys_dmsg
004 304 604 Thank you
“Thank you for calling ABC Paging.”
sys_thankyou
005 305 605 Pager function code *5
“At the tone, key in the pager function code.”
fcode_input
006 306 606 End-to-End overdial *5
“At the tone, enter the pager number.”
sys_end_end
007 307 607 Security code (for accessing client) *5
“At the tone, enter the security code.”
security_code
008 308 608 * ** Personal passcode *5
“After the tone, key in your personal passcode.”
passcode_input
009 309 609 ** Main menu *5
“PageSaver Main Menu. At the tone, key in your
PageSaver command or press zero for help.”
activity_input
010 310 610 Bad number prompt
“The number you have dialed is not in service”
bad_number