Specifications

Voice Prompts
52 025-9034AA
*= Applies to systems with Client Personalized Greeting option.
**= Applies to systems with PageSaver option.
***= Applies to systems with Talkback option.
****= Applies to PageSaver systems with Internal Routing (standard) for prompts 036-039.
*5= An alternate wording is preferred for Fast DTMF (voice or display) systems. See the next topic
for more information.
Fast DTMF Voice or Display
The Series 2000 Paging Terminal can be set up for what we call Fast DTMF input, which
is usually used with the Notify Voice-or-Display feature.
When this is used, the difference to the callers is that no beep plays after the prompts (that
is why the messages for them say “now” instead of “at the tone”); the caller can enter
DTMF anytime during the prompt.
The factory version of these alternate prompts can be installed by running a ZlinkW batch
file called alt_put.zb. See the Series 2000 Paging Terminals Installation and Maintenance
manual for details on ZlinkW.
The system configuration files also need to be updated for these features to work properly.
038 338 638 **** Route 1 mode active.
“You are now in route one mode.”
now_route1
039 339 639 **** Route 2 mode active.
“You are now in route two mode.”
now_route2
041
070
341
370
641
670
**** General purpose prompt 1.
**** General purpose prompt 30.
gp_p1
gp_p30
071 371 671 System load management.
“Your call cannot be processed at this time. Please
try again later.”
load_mgmt
072 372 672 System error.
“Your call cannot be processed. Please call
_______ to report the problem.”
sys_error
073 373 673 “At the tone, please speak your message or key in
your message.”
sys_vordmsg
074 374 674 “At the tone, please speak your voice message and
then key in the display message.”
sys_vanddmsg
999 Plays Test Tone to set phone balance and levels for
inbound and -- outbound trunks.
—
Command Number
Zetron Preferred Wording
Voice
File Name
Record Play Delete