Specifications

Managing the Subscriber Database with ZbaseW
68 025-9034AA
♦ Adding a sequenced block of subscribers:
1. Open the Edit tab and click on the Subscribers button.
2. Select the subscriber number for the first user in the sequence and program that
subscriber’s paging format and capcode.
3. Click on the Add Sequence button in the lower right of the window to open the
Add Subscribers in Sequence sub window.
4. Enter the number of records to add.
5. If you want the paging terminal to call each one of the new pagers when the
terminal database is up dated, check the box for “Send page to pager when
posted?” Otherwise, leave the box blank and the terminal will take no action.
6. Click on the Add button.
ZbaseW adds the new records to the system. Starting with the base record, for each new
record it increments the subscriber ID and the capcode(s), changing no other fields.
If you were using the new pagers right away, you would go back to Edit/Subscribers, get
into each record and put in the subscriber’s name and so forth.
When done with changes, be sure to do an Update to post the changes to the paging
terminal.
Caution! Once you have started it, you cannot stop it.
Note Be careful with Add Sequenced. If you just set up 100 records and
decided you really did not want them, the only practical way to get
rid of them is to delete each record one by one, which would be
quite tedious.
!