Specifications

Managing the Subscriber Database with ZbaseW
86 025-9034AA
Check Last Rollover Time
This button does exactly what its label states. It starts ZlinkW, contacts the paging
terminal, obtains that time and date of the last time call counts were rolled-over, logs off
the terminal. It then posts the information it obtained to a message window on the monitor.
ZlinkW (paging terminal prompt)
Clicking on the ZlinkW button in the Comm window causes ZbaseW to start the ZlinkW
program and leave it running.
The first thing that happens after you click the button is that ZbaseW opens a dialog box to
remind you that while you are using ZlinkW, no one else can access the paging terminal
through the serial port.
If you click on the Cancel button, then ZbaseW aborts the operation.
If you click on the OK button, ZbaseW starts the ZlinkW program and contacts the Series
2000 paging terminal using the parameters entered under the Locations option on the Edit
tab (see Locations on page 72).
The “+” on the last line is the paging terminal command line prompt, which indicates that
it is waiting for you to enter a command.
The following figure shows the process displayed in the ZlinkW window.