Specifications

Multiport Serial TAP Input
120 025-9035AA
For information on TNPP networking, please refer to Multiport for TNPP and TAP
Outdial on page 133.
Option Details
The Multiport option consists of a Multiport card (marked 2000 Series Multiport on the
front of the card), and software. A brief listing of the components includes:
• This document
• The Multiport software (usually transferred via modem to your paging terminal)
• The Multiport option hardware (950-9196) consisting of:
ZbaseW
If you received a major software or hardware update with this Multiport card, we will be
working directly with you on updating your system. For instance, updating from version
295 to version 300 takes many steps not outlined here. If you received a Translator disk
and instructions, you are doing a major update.
If instead you received a ZbaseW software Update disk (or disks), follow the instructions
on the “Office Software Configuration Summary” sheet that came with the disk(s).
Do any ZbaseW updates before proceeding.
Qty PN Description
1 702-9191 Multiport board, 2-port configuration
x 950-9197 Additional ports to make 4, 6, or 8 ports total (already
installed on the Multiport board)
1 709-0006 50-conductor ribbon cable/connector assembly
1 709-0004 50-conductor round cable
1 802-0093 Punch-down block
1 — Set hardware: 2 mtg. studs (250-0105) & 2 screws (220-
0108)