Specifications

Troubleshooting and Repair Procedures
180 025-9035AA
Trunk answers overdial line but
busies out after pager # entry or
after answering DID line
No database (D.B.)
Subscriber ID incorrect
Subscriber status not Valid
Not enough digits
Download database
Check printout for translation of
telephone numbers
Verify status field in database is
“V”
Check printout for digits of feed
Busy tones before true end of
paging
From Tel Level too low Increase appropriate FROM TEL
adjustment
# and Trunk TEST1 or 2 does not
blink
Phone system not passing overdial
Calling from pulse phone
Listen to phone line to verify
DTMF or clicks
Equip terminal with Dial Click
card or adjust dial click card
Accepts pager #, or call from DID
line, but busy signal after or
during display message entry
Terminal was expecting Function
Code
Phone system not passing overdial
Calling from pulse phone
Enter legal function code or do
not program for Caller Entered
Function Codes
Listen to phone line to verify
DTMF or clicks
Equip terminal with Dial Click
card or adjust dial click card
Accepts display message but no
transmission
Subscriber programmed for wrong
channel
Subscriber programmed with
illegal Func. Code
Display format option not ordered
Voice and display limit both
programmed nonzero
COR or Terminal Busy on
Edit subscriber channel #
Edit legal function code
Order option from Zetron
Only HSC allows both display and
voice
Fix connection to Station card
SYMPTOM PROBLEM SOLUTION