Specifications

221
OPARAM.CDS File
Table 28: Trunk Card OPARAM Codes (continued)
(**) = default value for parameter
Meaning cc pp qq ...
Alpha max transactions per
message
02 33 00 to FF = 0 to 255, zero indicates unlimited
transactions
Alpha password n+1 10 ASCII password string of length n
(**default = no password)
Alpha terminator for
transaction messages and
response codes
03 2C tt rr
tt = terminator for TAP transaction messages
00 = <CR> (default)
01 = <CR><LF>
02 = <LF><CR>
03 = <LF><LF><CR>
04 = <LF>
rr = sets terminator for TAP response codes
00 = <CR> (default)
01 = <CR><LF>
02 = <LF><CR>
03 = <LF><LF><CR>
04 = <LF>
Alpha timeout 02 11 **00 = timeout disabled
01 = timeout enabled - fixed at 30 sec (11 is for single
trunk only, and is ignored by dual trunk.)
Alpha Transaction messages 02 0D 00 = messages disabled
**01 = messages enabled
Answer preference for
end-to-end lines and for
DID overdial
02 02 **00 = DTMF overdial preferred
01 = Modem carrier preferred
02 = (Single trunk only, version 4g, and lines (new for
DID) later) Allow modem when no overdial
03 = Overdial only
Beep prompt for pager # 02 03 **00 = No beep
01 = Beep (PBX beep)
Debug mode 02 12 **00 = off
Decode “Reversed” Dial
Pulses
02 1D **00 = decode in standard way (1 pulse generated by
dialing 1, 9 pulses by dialing 9)
01 = decode reversed dials (1 pulse generated by
dialing 9, 9 pulses by dialing 1) (for international
support)
Dial click option 02 0E **00 = no dial click card
01 = dial click card present