Specifications

235
OPARAM.CDS File
Table 32: Station Card OPARAM Codes (continued)
(**) = default value for parameter
Meaning cc pp qq ...
Set Function Tone 03 1E byte 1 = Zone to set
byte 2 = Function tone # per table below
#
name freq.
0 f1 key 1950
1 f2 key 1850
2 PL dis 2050
3 mute f2 1750
4 unmute f2 1650
5 misc. 1550
6 misc. 1450
7 wildcard 1350
8 wildcard 1250
9 wildcard 1150
A wildcard 1050
B misc. 950
C misc. 850
D misc. 750
E misc. 650
F misc. 550
Example:
0F 00 03 1E 05 01 ; Zone 5, key F2
Station ID call sign n+2 09 byte 1 = zone # for this Id (00 to 0F)
bytes 2 to n = ASCII string of Id chars (hex value)
Only uppercase letters, A-Z, and digits, 0-9, may be
used. Refer to Appendix B for hex value of ASCII
characters. (**default = no Id)
Station ID time 02 08 nn = # minutes between Id cycles
03 byte 1 = # minutes between ID cycles
byte 2 = mode (0=normal, 1=Id always,
2=Id if terminal or COR activity
04 byte 3 = WPM ID speed (default 20 {14 HEX})
Station number and
permissions
03 18 byte 1 = station channel number. For setting unique
channel number for ZbaseW.
2 = station permissions, bit field:
01 = no voice channel for this station channel
02 = talkback enabled
03 = talkback enabled, no voice channel (card
used ONLY for talkback) (310d4 &
later)
Note: ancient systems had byte 1 and byte 2 with value
20.