Specifications

239
OPARAM.CDS File
Table 34: Multiport Card OPARAM Codes (continued)
(**) = default value for parameter
Meaning cc pp qq ...
Parity, serial port 02 0C 00 = Even parity (7 bits) **default
01 = Odd parity (8 bits)
02 = No parity (8 bits)
Password, setting n+1 10 nn... = ASCII password string of length n (n ranges
from 0 to 6) **default = 00 = no password
Select alpha manual input
terminator - or - Modify all
editing keys
02
06
26
26
nn = Define manual input terminator **default = 0D
byte 1 = Define manual input terminator **default = 0D
byte 2 = Define backspace character **default = 08 (hex)
byte 3 = Define delete character **default =7F
byte 4 = Define Control-X character **default = 18 (hex)
byte 5 = Define Control -W character **default = 17 (hex)
Set TAP logon prompt
compatibility
06 2B byte 1 = Wait for <CR> from device before sending the
“ID=” logon prompt
00 = off, no wait (default)
01 = on, wait for <CR>
byte 2 = Set prompt for TAP logon
00 = ID= (default)
01 = ID=<CR>
02 = ID=<CR><LF>
03 = ID=<LF><CR>
byte 3 = Set maximum number of attempts for a TAP
session (0 to 255, 0 = unlimited)
00 to FF (default = 00)
byte 4 = Sets handling or <CR> after paging terminal
issues TAP “ID=” logon prompt
00 = reissue “ID=” logon prompt
01 = no response
02 = send <NAK>
byte 5 = Set handling of unexpected input (something
other than <CR>)
00 = no response (default)
01 = <NAK>
Set terminator for TAP
transaction message
03 2C byte 1 = set terminator for TAP transactions
00 = <CR> (default)
01 = <CR><LF>
02 = <LF><CR>
03 = <LF><LF><CR>
byte 2 = Set terminator for TAP response codes
00 = <CR> (default)
01 = <CR><LF>
02 = <LF><CR>
03 = <LF><LF><CR>