Specifications

System Configuration Files
240 025-9035AA
Table 34: Multiport Card OPARAM Codes (continued)
(**) = default value for parameter
Meaning cc pp qq ...
Select Carrier Timings 05 2E bytes 1 & 2 = Carrier seen
(**default = 03 E8 (hex) = 2 seconds)
bytes 3 & 4 = Carrier lost
(**default = 03 E8 (hex) = 2 seconds)
Select DTR wait 05 2D bytes 1 & 2 = DTR low wait (**default = 1000)
bytes 3 & 4 = DTR high wait (**default = 1000)
Select modem hang up
guard time
03 2F bytes 1 & 2 = Guard time in 0.1 second increments
**default = 1E (hex) = 3 seconds
Select whether to wait for
<CR> before “ID=”
(Also allow setting
terminator for ID=, number
of logon tries, and setting
<NAK> behavior)
06 2B byte 1 - 00** = OFF, 01 = ON
byte 2 - 00** = None, 01 = <CR>, 02 = <CR><LF>
byte 3 - Number of logon tries (**default = 03)
byte 4 - How to handle subsequent <CR> inputs
00 = reissue “ID=”
01 = no response
02 = <NAK> (**default)
byte 5 - How to handle unexpected input other than <CR>
after “ID=”, for example five characters such as
“12345”
00 = no response
01 = <NAK> (**default)
Set Motorola People Finder
Emulation mode
02
04
31
31
00 = Zetron manual mode (**default)
01 = Motorola People Finder Emulation manual mode
(contact Zetron Technical Support for more
information on using this mode)
01 = Same as 01 above
Byte 2 = Zetron COMP1, the fixed length pager number
field will be used (the valid range is from 01 to 07)
, or, if set to 0, it is of variable length
Byte 3 = Motorola People Finder COMP2, the delimiter
character will be used (the valid ASCII character is
from 0 to 70 in HEX