Specifications

System Configuration Files
256 025-9035AA
Table 31: TAP Outdial Per-destination Parameters (continued)
Meaning cc pp qq ...
Session control
(continued)
vv 04 Byte 8 = Seconds to wait for message go-ahead. The number
of seconds to wait for the “paging go ahead” from
the called system, after logging in. Logging in is the
set of actions starting with sending Carriage Return
to get the “ID=”, through receiving an acknowledge
of the paging mode. On many implementations of
TAP there is a noticeable delay between logging in
and the paging go ahead. The default value is 10
seconds.
Bytes 9 through 15 Optional Login Password An optional
field of up to 6 characters. Some system will have a
password set that a caller must enter before they can
send TAP pages to the system.
Some implementations of TAP required the
password to always be given, and in many cases that
it be exactly six characters in length. On these
systems the password would often be set to
“000000”, the nearest they can come to not requiring
a password. The default is no active password.
10-digit area code 05 0D byte 1 = Dialing destination
byte 2 = 3 + first digit of area code
byte 3 = 3 + second digit of area code
byte 4 = 3 + third digit of area code
The second digit of each hexadecimal pair equals a
digit of the area code. For example, the area code
425 would be entered as: 34 32 35