Specifications

System Configuration Files
270 025-9035AA
MTTMk7VorD
This command only effects subscribers that have been assigned Multitone Mk7 pagers set
for Mode 6 (display paging) that also have the voice time parameter set to something
larger than zero.
MTTMk7VorD Yes ;If set to Yes, then a Multitone Mk7 page (set to
;Mode 6 with a voice time greater than zero) is
;enabled for Voice or Display paging.
MTTMk7VorD No ;If set to No, then a Multitone Mk7 pager (set to
;Mode 6 with a voice time greater than zero) behaves
;as it did in earlier versions of the S2000 paging
;terminal software. (Prior to ver 310KE)
The MTTMk7VorD command being absent from the options.cus file is the same as it
being set to “No”.
Notify
The Notify command controls some details of Notify mode operations. The format is:
Notify Old IdNone
Or IdGroup
IdAll
The default, and formerly the only, method of operation for notify mode is:
Notify Old IdNone
New systems may wish to use:
Notify Or IdAll
The “Old” keyword says that Notify mode will take a voice message only (unless you
know about the “secret” 1 overdial). The “Or” keyword says that Notify mode will take
either a spoken voice message OR an overdialed display message (requires 6F0 or later
trunk code).
The “Id...” keywords control whether the called telephone number is prefixed to the
notification message. Thus IdNone never causes a called telephone number to be prefixed.
The IdGroup causes the called telephone number to be prefixed if the called number is a
group number - that is identical to the already existing “GroupNote Yes” OPTIONS.CUS
line. The IdAll causes the Id number to always be prefixed to the notification message;
this can be useful on a network of paging terminals where some subscribers have phone
numbers/ mailboxes on all terminals - the ID on the display tells them which paging
terminal to call for their message.
With the release of version 310j0, the paging Notify mode was expanded to provide
insurance of overdialed display messages. Now Notify mode can either work as it did
previously or the display messages can be insured, similar to Insure mode. This means that
a subscriber in the new insured Notify mode will have all overdialed display messages
saved in their mailbox.
This feature can be given to all subscribers or just to those subscribers who have Notify
and Insure modes. If the feature is given to all subscribers, default values apply to the
number of insurance slots and retention time.