Specifications

309
Configuring Communications from within ZlinkW
♦ Exiting ZlinkW:
1. You can exit the ZlinkW program by either opening the File menu and selecting
the Exit option or by clicking on the window Close button in the upper right corner
of the window.
2. When ZlinkW closes, you are returned either to the ZbaseW Comm tab in the main
window or to the desktop, depending on where you started out from.
Configuring Communications from within ZlinkW
The procedure described here assumes that for some reason you have started ZlinkW
independently of the ZbaseW program. Normally, it is expected that you will be running
the ZbaseW program and that you will specify the paging terminal to communicate with
from within either of those programs.
♦ ¨ Setting ZLINK Communication Properties
1. From the ZlinkW menu bar, select the Communications menu.
2. From the Communications menu, select the Properties option. The ZlinkW
Properties dialog will open.
3. In the ZlinkW Properties dialog, select one of the three option buttons across the
top to specify the mode of communications being used: Modem, Serial, or
Network. The dialog will disable some of the fields in the window based on the
mode of communication you select.
4. Fill out the remaining fields to support the communications mode selected in the
preceding step.
5. Click on the OK button to save the settings exit this dialog.