Specifications

Remote Maintenance
314 025-9035AA
B0300 = 300 baud B1440 = 14,400 baud
B1200 = 1200 baud B1920 = 19,200 baud
B2400 = 2400 baud B2880 = 28,800 baud
B4800 = 4800 baud B3840 = 38,400 baud
B9600 = 9600 baud
The string for specifying the baud rate and indicating that a local serial connection is in
use can be entered in two ways. You could type “B3840L” or you can type “L3840”. Both
strings are interpreted the same way by ZlinkW.
IP Network Connections
The letter "N" is used in the Phone Number field to indicate that a network connection is
being used. The "N" is followed by the IP address of the paging terminal and the port
number being used on the network-to-serial port adapter attached to it. The address and
port number are separated by a colon. For example, the following string indicates the
connection is a network connection to IP address 169.254.4.229 through port 2101.
N169.254.4.229:2101
ZlinkW Command Reference
The ZlinkW commands are listed briefly in Table 48. If any options or parameters are
available for a command, you would enter those options on the same line as the command.
Following the table are more detailed descriptions for some of the more important
commands.
If a paging terminal or office computer is running earlier versions of software, some
commands will not work, or will work a bit differently. (ZlinkW version 5.32, ZPAGE
version 310h1)