Specifications

357
Results of Calls
Error Results
(Usually a ZbaseW programming error)
System Errors (Call not processed)
Result Type Description
not valid Talkback call to no-voice SIU.
bad dest Bad channel number, TNPP destination not known.
invld dest Bad channel, TNPP destination not known. (Old form of above).
no channel Usually invalid override settings.
no zone Usually invalid override settings.
no dest The database record had no destination to which a page could be sent. This
could be a side effect of having a dead station card.
If a subscriber has several destinations, such as several channel/zone
combinations, and one of those is invalid or dead, then only the “bad dest”
posting will appear. All of the valid/alive destinations should appear with
the “sent” result. If ALL of the destinations are invalid or dead then each
destination will have the “bad dest” posting and there will be a final
posting of “no dest”. Usually the call will not have been answered; this is
not true in the case of groups.
Bad Link Internal forward or retrieval call where the number to forward to is not in
the database.
bad mode Mode wrong for attempted operation, i.e. group member with announce
only.
wrong status Can not use the database entry in desired mode. A record with “P” status
in a group is an example.
missing Group ID not in group.bin (not in group database).
ID not found Group member subscriber ID not active.
no batch Rejected by SIU/NIU.
not batched Rejected by SIU/NIU. (Older form of above).
bad site Alarm site # not in database.
Result Type Description
bad SDR Invalid record type. Could be a problem in upgrading from older ZPAGE/
ZBASE to current level.
Bad TS value Not normally seen, contact Zetron.
bogus ID Really bad subscriber ID - may be due to a bad trunk card.
TS error Not normally seen, contact Zetron.