Specifications

51
Configuring the Digi One™ SP Option
Table 3: Browser configuration of the Digi One™ SP Module
A re-boot of each DIGI device is required after these configuration changes.
♦ Programming the Digi One SP module with your Internet browser.
1. After opening your browser, manually enter the address of the Digi One SP
module into the address bar. In our example this would be “10.0.1.22”. Press
ENTER and the log on dialog box that follows should appear.
2. Enter the default user name (root) and password (dbps) into the appropriate boxes
in the dialog and click on the OK button. The Home screen for the module should
appear. The screens we need to open can be accessed by clicking on the options
found in the column on the left of the screen, under the heading Configuration.
Parameter Digi One Setting
login user root
login password dbps
NETWORK no change
SERIAL PORT
Basic Serial Settings:
Advanced Serial Settings:
require user to login
Verbose connection
(click “APPLY”)
No Change
No
No