Specifications

Installing the Office Software
56 025-9035AA
Specifications
Dialup Modem Connection to Paging Terminal
To install the modem telephone line connection at the paging terminal, remove the front
panel and top cover of the 2000 Series paging terminal. Plug a telco cable with RJ-11C
modular jack into the modem card in Slot 2. The jack you should use is labeled either
LINE or WA LL (do not use the jack labeled PHONE). Connect the other end of the
telephone cable directly to the telephone company supplied wall jack. The modem card
has a built in speaker for call progress monitoring.
Local Office Computer
To install the optional local RS-232C computer connection, attach the RS-232C cable
between the DB-25P port labeled LOCAL on the lower left of the lower backplane, and
the serial port of your office computer. Refer to CPU Card (702-9176) on page 151 for
information on cable routing, pinouts, and maximum distance between the office
computer and the paging terminal.
PC Feature Guidelines
Computer Any IBM-compatible personal computer, ZbaseW and ZlinkW do
not care whether the processor is genuine Intel
®
of one of the
competing brands
CPU Speed 500 MHz or faster
Memory 256 MB minimum, more is better
Hard Disk The final number will depend on the options covered by your license,
assume minimum values of:
10 MB of free disk space to load ZbaseW
5 MB of disk space for each 1000 users in database
CD-ROM/Floppy Drive Requires a CD-ROM drive for installing the ZbaseW software
3.5 inch floppy drive is entirely optional
Display Requires a video card and monitor capable of providing a resolution
of 1024 x 768 or higher
Operating System Microsoft Windows XP
®
with SP2,
Windows Server 2003
®
with SP1 or later
Database Engine Microsoft Access 2007 Runtime
Modem Optional depending on where PC is located relative to the Series
2000 paging terminal, internal modem prefered
Serial Port A standard RS-232 serial port is not required unless you are using a
local connection to the Series 2000 paging terminal or an external
modem. Since serial ports are no longer standard equipment on
personal computers, you may need to purchase an aftermarket card to
provide one.