Specifications

Installing the Office Software
60 025-9035AA
ZbaseW Communications (ZlinkW)
Now that the office computer software is installed, you need to configure the software for
communications with the paging terminal. You should at this point already have the
hardware in place to communicate from the office computer to the Paging Terminal (see
pages 26 and 191 for details). If you do not, come back to this section when you do. For
detailed instructions on operating ZbaseW to change subscriber settings and transfer them
from the office computer to the paging terminal please refer to the 2000 Series Operating
& Programming Manual (025-9034).
To configure the communications software you need to edit the locations settings for your
particular type of communications link, telephone number, and other similar information
related to each specific paging terminal location.
♦ Editing a Location
1. Click the Edit button on the ZbaseW Main menu.
2. In the Edit menu, click the Locations button.
3. In the Locations Records window that opens, click on the New button and then fill
in the information for Site Name, Password (optional), Phone number. and Port.
4. When you have finished entering the information for a site, click on the Next
button.
5. Click on the Close button to return to the Main menu.
Communications Update Paging Terminal, Import Active Call Counts, Rollover Call Counts and
Import, Check Last Rollover Time, ZlinkW
Traffic/Stats View Current Traffic, Import Statistics, View Previously Imported Statistics, Print
Previously Imported Statistics
Special Send a Page, Swap Pagers, Halt Service for a Subscriber, Change Where the
Database is Found, Full Rebuild
Info License Agreement, Version and Copyright Information
Tab Function Buttons
Parameter Description
Site Name The Site Name is just a reminder name for the site at which the
paging terminal is located. The name will be shown each time you
link up to the paging terminal. If you do not have multiple sites, you
may just leave it blank.