Specifications

Installing the Office Software
62 025-9035AA
5. Click on the OK button to save the settings exit this dialog.
ZlinkW Property Fields
What follows is a brief description of the fields in the ZlinkW Properties dialog box.
Modem
This mode of operation assumes that both the PC running ZlinkW and the paging terminal
have modems attached to them. You will need to supply the phone number of the modem
attached to the paging terminal and any necessary initialization string for the modem
attached to the PC.
Serial
This mode of operation assumes a straight serial connection between the PC and the
paging terminal. You will need to specify the baud rate for the connection and the COM
port being used.
Network
This mode of operation assumes that there is a IP-Network-to-Serial Port adapter attached
to the serial port of the paging terminal. You will have to supply the IP address of the
adapter attached to the serial port on the paging terminal and the port number being used
by that adapter for raw TCP data.
Phone Number
This field is for the phone number that the modem attached to the computer must dial in
order to reach the modem attached to the paging terminal. The phone number can be
prefixed with a “Bxxxx” to set the baud rate the modem is set to prior to the CONNECT
string occurring. (See Local Connections on page 64 for a list of the 4-digit baud rate
settings.) Alternatively, the phone number can be prefixed with “Dxxxx” to set the baud
rate the modem is set to for the entire session.
If ZlinkW has been invoked from within ZbaseW for network-based communications, you
will see a string with the format Nxxx.xxx.xxx.xxx:ppppp displayed in the Phone Number
field. See Network Connections on page 64 for more information on what this means.
Baud Rate
This field sets the baud rate used for the serial port in the Serial mode. Use the arrow on
the right to open the drop-down list and select the desired baud rate.
Remote TCP/IP Host
This field is used for the Network mode of communication. Enter the IP address for the
network-to-serial converter attached to the paging terminal. For example: 169.254.4.229