Specifications

ZbaseW Communications (ZlinkW)

Modem Init String

This field is used to enter a modem initialization string if it is necessary to configure the

modem to something other than its default settings.

Autobaud Local

This check box modifies the behavior of a local serial connection. It has no effect on a

modem connection. Checking this box allows the computer to try other baud rates if it

does not establish a connection using the baud rate selected in the baud rate field. It will

try all of the available baud rates until it makes a connection with the paging terminal. If

the baud rate originally specified was correct, then checking this box will have no affect

on operation.

Remote TCP/IP Port

This field is for specifying the IP port number to be used at the network-to-serial adapter

attached to the paging terminal. The port number will be supplied by the software

configuration tool that came with the adapter when you set the IP address.

Ignore CD

This item works with the Modem mode. If this box is checked, the modem will not

disconnect automatically on loss of carrier.

Com Port

This field is used with both the Modem and the Serial modes of operation to specify the

PC serial port used for the communications link.

Batch file to run on login

This field specifies a batch file for the PC to execute after it logs on to the paging terminal.

It is best that you do not attempt to enter anything here from ZlinkW. If you last ran

ZlinkW as part of a ZbaseW or MCU command, you will find a batch file listed here.

Password

This field holds a password to be used by the PC to log on to the paging terminal. If you

know the correct password, you can enter it in this field. If you have made a connection

from within ZbaseW, then this field will already hold whatever password you used last.

Modem Connections

If a modem is being used (internal or external connected to a serial port on the PC), you

simply type the telephone number to be dialed into the Phone Number field. You do not

have to hyphenate the number; however, you may do so to make it more readable if you

prefer. The ZlinkW will ignore the hyphens.