Specifications

PART THREE - ADVANCED FEATURES
001-0131B October 1997 Page 14
3.2.1 Do you want to route calls to a PABX?

yes

no
If desired, order the routing option below which will handle the type of PABX interface you need.
-B38
dial out on end-to-end line
- acting as telephone side of interface
- connect as a PABX station (telephone), or into DID with no answer supervision
detection
-B42
connect into end-to-end line
- acting as TELCO side of interface
- ring only (no digits dialed after answer)
- e.g., live attendant or night ring
-B43
dial out to end-to-end line
- acting as TELCO side of interface
- ring and dial digits after answer
- e.g., automated attendant in use
-B39
dial out on and into an E&M line
- two way E&M support
-B40
dial into DID line
- with answer supervision monitoring
- requires matrix plug shown below
702-9327
End-to-end with loop detect Matrix Plug
(connects into a DID line)
3.2.2 Do you want to route calls to a telephone answering service?

yes

no
If desired, order the routing option below which will handle the type of TAS interface you need.
-B39
dial out on and into an E&M line
- two way E&M support
-B40
dial into DID line
- with answer supervision monitoring
- requires matrix plug shown below
702-9327
End-to-end with loop detect Matrix Plug
(connects into a DID line)
3.2.3 Do you want to provide interconnect forwarding from the paging terminal to a Zetron Model
49?

yes

no
If desired, order the -B45 routing option. If mobile originated calls are also desired, then choose one of the
following: -B38 dial out on end-to-end line or -B39 dial out on E&M line
3.2.4 Do you want to provide interconnect forwarding from the paging terminal to a Zetron Model
45/46/48?

yes

no
If desired, order the -B46 routing option and the matrix plug (702-9335). It should be noted that mobile to
land line calls are via M45/46/48 line 1 or 2 and are not routed through the M2000.