User Manual

F. Red LED (LED Charging Light)

G. Yellow LED (LED WiFi Light)

H. Blue LED (1080P Recording Light)

I. Green LED (2K Recording Light)

PS: Blue and Green LED ( 720P recording Light)

Basic Operation EN

Turning on to standby mode, short press again to start video

recording

To turn on the video-glasses, simply press the ON/OFF button for 1

second. The green/blue LED is on and the device enters into the

initialization status and standby mode, it vibrates once and the green LED

stays on ( the default is 2K, green LED), press shortly again to start video

recording, it will pulse vibrate tiwce and the green LED (factory default)

flashes slowly, it begins to record automatically. Note: During recording,

green LED is 2K light, blue LED is 1080P LED light,

Blue and green LED is 720P light.

Switch to standby mode(Pause mode) from recording

To go into standby mode(Pause mode), shortly press the ON/OFF button

for once while recording. It pulse vibrates once and the LED stops

flashing. To go back to recording mode, press ON/OFF button once

again.

Turning off to stop video recording

To turn off the video-glasses, press the ON/OFF button again for 2

seconds, it vibrates continuously for 3 seconds, the green and blue LED

both flash fast for 3 seconds, the recorder automatically saves the

recording file and then turns off.

Note: To limit the file size, the recorder will automatically save the file

every 30 minutes max and then start with a new file. It can be changed to

5 minutes, 15 minutes and 30 minutes a file in SETTING.txt.

4. How to start video recording during charging

This device can record during wall charging or power bank charging. After

connecting the power, the glasses enters into recording mode

automatically.

Note: If you don’t want the glasses to enter into recordings automatically,

please take out the memory card before connecting the power.

5. Taking photo

There are 2 ways to take photos (Each time, it would take 1,3 or 5 photos

according to your setting):

During recording, quick press the ON/OFF button 2 times quickly, the

device pulse vibrates once and the green/blue LED both on, then it

finished taking photo, after taken photo, it will pulse vibrate twice and

go back to recording mode.

During recording, short click the ON/OFF button once, it will vibrate

once, the device go into standby mode and the recording LED will

stay on. Double click the ON/OFF button, tit vibrates once and the

green/blue LED will both be on, the photo is taken. After taken photo,

it would keep