User Manual

Note: In order to avoid damaging the glasses, please make sure to switch

to the “power off” mode before removing the SD card.

Attention:

This is real hardware decoding item, full HD 1080P, the data transmission

is high. For more quality video,

• Moving out the memory card from the video-glasses to playback is highly

recommend.

• Please copy the recording files from memory card to PC to playback.

• It needs real high speed micro-SD card(TF card) U1 level or above.

• High version player.

• Please be sure there is enough virtual memory to support playing.

2.2 USB Storage mode

a. When device is under "OFF" status.

b. Connect the device to PC or Mac through USB port with Micro

USB2.0 HS cable provided in the kit, the red, green and blue LED are

on.

After 2~3 seconds(depends on the memory Capacity),

vibrating pulses twice, the movable disk icon will pop up in the

computer.

d. The directory for saving video file is *Disk\ DCIM\.

e. You can then copy or cut and save to your local hard driver

f. When finished, click the movable device management icon

at the

lower right corner to remove the storage disk safely; Moving out

USB cable, it vibrates continuously for 3 seconds, then switches off.

SETUP EN

1. How to setup?

In app, we can set parameter by setting.

To change settings, please stop recording first and make sure it is in standby

mode(pause mode). The change is set and ready for new recording.

2. Setting Real Date / Time, the default is hiding format.

This device can display the current date / time in your videos. The time is

synchronized with the smart phone.

To set this function:

2.1 In app mode, Stopping records

2.2 Setting Date Stamp “on”, then back to Recording mode

2.3 Time is set and ready for new recording.

Changing the lenses EN

Note: Remove the protective film on the lenses before wearing the sunglasses.

To remove the lenses,

hold the glasses and firmly push out on the area indicated by the red oval

(see below)