NANO-4K USER MANUAL DELUX
IN THE BOX A B C D E NANO 4K camera unit Li-ion battery USB cable 8x shirt buttons This manual
DIAGRAM
SETTING UP THE APP 1. Download the app - LookCam Search and download LookCam on the App Store or Google Play. .... you can also scan the QR code below via QR scanning app for direct URL link. 2. Setup the NANO Insert a Micro SD card in the card slot 3 if you're planing on recording media directly on the NANO. Push the card in all the way until you feel it click. Plug in the included battery to the NANO's battery connector 5.
To charge the battery, use the included USB cable to connect to a charger or any live USB port. Then connect to the NANO USB port 4. The indicator will stay on red while charging and go out once fully charged. 3. Setup the WIFI Connect your phone to this camera's WiFi access from your phone's WiFi settings, search and connect to the WiFi signal starting with "F###...".
Back in the App, if it hasn't detect your camera yet, add one by taping the "+" plus sign, Add new online camera, then ADD BY LAN. You shoud see a new device listed.
4. Setup remote connection Tap the gear icon from your camera device, then Cofig Wi-Fi, or WiFi Setting if on an Android.
Finaly, choose your local WiFi network and enter the password. If you dont know your local WiFi password please check with your internet provider. Once connected you will be able to watch and control video recording live from the app remotely.
Tap on the camera device on the list, it may take 30 seconds for video to come up.
Product Specs Resolution Ratio 1080P/720P/640P/320P Video Format AVI Frame Number 25 Visual Angle 150 /90 degree Motion Detection Camera Straight line 6 meters Shooting Minimal Illumination 1LUX Video Duration Over 1 Hours Compressed Format H.264 Recording Range 5㎡ Consumption 380MA/3.
