Instruction Manual

ADDING A CAMERA
A. Connected the power supply and turn on the device by ON/OFF
switch. The green light will flashing and the camera are waiting to be
connected.
B. Enter your phone “settings”-> choose “WLAN”-> find the camera’s
hot-spot signal (the name of the signal is “Camama_XXXXX”),connects
the camera’s hot spots.
Important Note!
If you can not find the camera’s hot-spot signal, please reboot the device
by press the reset button about 5s until listening a sound of “Ding”, after
that, the hot spot signal will come up again and you can connect it for
next steps.
C. Load the APP (Camama) and click the button to add new