zWiFi-OutletCam WiFi Outlet Camera USER MANUAL WARNING You must have a licensed electrician install this outlet camera device. Zetronix Corp. is not responsible for damages or injuries resulted from the installation or use of this outlet camera device.
Before installing the outlet, please ensure that there’s a Micro SD memory card installed on the back of the outlet cam if you plan on recording media locally. The outlet cam is installed as any common electrical outlet. Please have a licensed electrician install the outlet camera device.
I. Startup The device can be powered by installing it to an electrical outlet or simply via USB. Slide the ON/OFF switch to turn on the camera. Look inside the MicroSD memory card slot for the hidden light. A red light indicates that the camera device is on. A blinking blue light indicates the WiFi is connected. II. Download APP software Search for APP software called LOOKCAM on the App Store or Google Play, download it and install it. III.
After the UID of the device is connected, open the phone APP (LOOKCAM). (As shown below) It most likely will automatically detect the camera device and prompt you to connect to it. Tap “OK”.
You should now be able to preview video in your phone. By taping on Device Online, you will see live video stream.
IV. Set up remote stream So far you can only preview video if you are connected to the same local network. To access remotely, the camera needs to access your local network to connect to the internet and broadcast the video. Click the setup icon → Advanced Configuration →WiFi Connection Configuration → Find WiFi → Enter Password → Click OK and the camera will restart automatically. (Wait for the camera to restart (about 40 seconds).
Select your local WiFi network, and provide the password.
V. Quick Troubleshooter • The camera supports up to 128 GB Micro SD card. Please use High Speed Class 10 FAT formatted memory card. • You may have to format the Micro SD before using. • Most issues can be fixed by resetting the device. Press and hold the reset button for 15, wait a few minutes for the WiFi to reboot. • The default password, if needed, is 123456 • This device does not work with a 5GHz network, please ensure your router has a 2.5GHz capability and that you are connecting to its 2.
Product Specifications Resolution Ratio Video Format Frame Number Visual Angle Motion Detection Camera Shooting Minimal Illumination Video Duration Compressed Format Recording Range Consumption Storage Temperature Operating Temperature Operation Humidity Memory Card Type Player Software Computer Operating System Operating System 1080P/720P/640P/320P AVI 25 150 /90 degree Straight line 6 meters 0.1LUX Over 1 Hours H.264 5㎡ 380MA/3.