Datasheet

GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
7
Electrical 1 x 10
5
at 80 A 14 VDC Res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms contact to contact
Insulation Resistance 100 megohms min. at 500 VDC, 20°C
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" DA at 10-55 Hz
Shock 10 g
Enclosure PA (UL94: V-0)
Terminals Copper alloy
PCB
Max Solder Temp. 270°C (518°F)
Max Solder Time 5 seconds
Max Solvent Temp. 80°C (176°F)
Max Immersion Time 30 seconds
Weight 40 grams
AZ
7/29/11
COIL
Power
At Pickup Voltage 0.76 W
(typical)
Max. Continuous 3.0 W at 20°C (68°F)
Dissipation
Temperature Rise 68°C (122°F) at nominal coil voltage
Temperature Max.155°C (311°F)
CONTACTS
Arrangement SPST (N.O.) (1 Form A)
SPDT (1 Form C), SPST (N.C.) (1 Form B)
Ratings Resistive load:
Max. switched power: 1120 W (SPST) Form A
840 W (N.O.) Form C
840 W (N.C.) Form C, Form B
Max. switched current: 80 A (SPST) Form A
60 A (N.O.) Form C
60 A (N.C.) Form C, Form B
Max. switched voltage: 75 VDC
Material Silver tin oxide
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
AZ983
80 AMP MINI-ISO
AUTOMOTIVE RELAY
FEATURES
• PCB terminals
• 80 Amp contact rating
• High momentary carry current
• High operating temperature (85°C)
• SPST N.O. (1 Form A), SPDT (1 Form C),
SPST N.C. (1 Form B)
• ISO/TS 16949, ISO14001
• Tested in accordance with SAE J2544
• Epoxy sealed version available
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.