Installation Guide

R
(4) Hang the clothes pole inside the tent
Assemble the 4 leg poles (5). Then proceed to clip each
tent clip onto the poles (6) on each side of the tent.
Install the roof fly (7) by hooking 2 sides first onto the meta
l oval rings (8) attached to the frame, then pull the other 2
sides then latch the 2 remaining hooks to the 2 oval rings.
Insert the pins from the bottom of the tent into the holes of
the poles (9) to stretch out the tent from top to bottom.
Fig3
(10) HINT: Plant the pegs at
a 45 degree angle and about
1 meter away from the tent
(11) Lay the floor in the center
and lock it in place by hooking
it to the rings of the tent pin
Fig4
Unroll your shower tent and lay out the tent poles (1).
at the top into the 4 point plastic connector (2).
Slip the 4 poles through the webbing of the shower tent
(3) and connect
1
2
3
4
5
6
7
8
9
10
11
SHOWER TENT ROOF FLY
4 X TENT POLES
CARRY BAG
8 X METAL PEGS CLOTHES POLE
DETACHABLE FLOOR
Fig1
Fig2
GENERAL INSTRUCTIONS FOR
UNP PORTABLE SHOWER TENT
MANUAL
COLOUR : BLUE/GREY
Parts list:
Sincere and effective service
please contact us via amazon message with order id if there is any
missing part or any other questions, our
professional after-sales service team with camping-enthusiasts will
reply within 8 hours with satisfying solution.
Sincere and effective service