Instructions / Assembly

Page:  2  / 6
[e-mail]
TOOLS REQUIRED (NOT INCLUDED):
Before starting assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(C) Mounting plate assembly (1)
(D) Green ground screw (1)
(E) Back plate (1)
(F) Stud (3)
(G) Joint (3)
(H) Arm (2)
(I) Socket (1)
(J) Lampshade (1)
(K) Socket ring (1)
(L) Ball nut (2)
ACCESSORIES & QTY ENCLOSED:
(A) Plastic Wire Connector (3)
(B) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are
included as shown in the above illustration.
2. Turn off power
Before you start the installation, NEVER attempt any work without shutting off the electricity
until the work is done.
A) Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
B) Place the wall switch in the “OFF” position.