Instructions / Assembly

Page:  3  / 6
[e-mail]
3(a). Remove studs (F) from joints (G).
5(a). Make wire connections
Connect the black and white wires in back
plate (E) to the plug wires in the accessories
bag.
Secure the connections with plastic wire
connectors.
PLEASE NOTE THAT GROUND WIRE IS
BARE COPPER WIRE, NEVER CONNECT
OTHER WIRES TO GROUND WIRES.
Connect wires according to the below chart
(a) For PLUG IN Installation:
4(a). Carefully pull the wires and fiberglass sleeve
from the other end of arm (H).
Push socket (I) to put two parts of joint (G)
together, then lay wires in the fluted side of
joint (G).
Put two parts of joint (G) together again, and
secure them with stud (F).
Do the same to the other two joints (G) as well.
Adjust studs (F) and lock arms (H) together.