Instructions / Assembly

Page:  5  / 6
[e-mail]
6(b). Make wire connections
Connect wires as below wires connection shown. PLEASE NOTE THAT GROUND WIRE IS
BARE COPPER WIRE, NEVER CONNECT OTHER WIRES TO GROUND WIRES.
(b) For Hardwired Installation:
3(b). Remove studs (F) from joints (G).
4(b). Carefully pull the wires and fiberglass sleeve
from the other end of arm (H).
Push socket (I) to put two parts of joint (G)
together, then lay wires in the fluted side of
joint (G).
Put two parts of joint (G) together again, and
secure them with stud (F).
Do the same to the other two joints (G) as well.
Adjust studs (F) and lock arms (H) together.
5(b). Attach mounting plate (C) to the outlet box on
the wall using mounting screws (A).