Data Sheet

ManualsBrandsZF ManualsActive ComponentsZF Angle and tilt sensor AN820002 AN820002 Reading range: 360 ° (max) Analogue voltage Delphi MetriPack

38±0.2

28±0,3

315±6

(23)

6 WIRES

20 AWG TXL

6X (4.6)

[.180]

(40)

0° Position

MAGNETIC FIELD

DIRECTION AT 0°

POSITION

SENSING LOCATION

2X 5.3±0.1

AN9

5.0

MAX AIR GAP

17.7

GND

8.5

0.1

OUTPUT

48.3

41.9

57.33

R 15.57

2X Ø 5.3 ± 0.1

Std.

Magnet

Rotation

N. S.

35.5

0.1

AN8

AN8 / AN9 Series

THIN ANGULAR

POSITION SENSORS

Mechanical Speciﬁ cations

Mechanical Travel

0 to 360 degrees (no stops)

Dither

No mechanical contact

Mating Connector

Connector: Delphi Metri-pak

150.2 12162185

Terminal:12124075

Maximum Air Gap

5 mm

Maximum Center-to-Center Offset

2 mm diameter (magnet to sensor)

Programmable, non-contact magnetic position sensors capable of continuous rotation

Features and Beneﬁ ts

 Angular position with high tolerance for misalignment

 Provides non-contact angular position sensing and full 360 ° rotation

 AN9 versions with dual (redundant) outputs assuring very high reliability

 5 VDC ratiometric device.

 Sealed design exceeds IEC 60529 IP68 standard for immersion

 Performs with AS500106 standard magnetic carrier

 PWM output option available for custom applications

 Provided with EMI/ESD protection to SAE J1113 standards

 No mechanical interface means no parts to wear out

 Available with wire leads 12" (305 mm)

Description

The sensor operates by rotating a magnetic actuator close to the face

of the sensor. Output voltage varies with angular position of the magnet

relative to the sensor.

Optimal performance is achieved with Cherry’s AS500106 magnetic

actuator. Sensor kits including this standard magnet are available

Part Number

Sensor

Part Number

Set incl. magnet*

Sensing range Interface

AN820001

CU103601 180° Connector

AN820002

CU103602 360° Connector

CU103603 45° Connector

AN820031

180° Wires

AN820032

360° Wires

AN920031

180°, dual output Wires

AN920032

360°, dual output Wires

AN920036

90°, dual output Wires

*Sensor plus AS500106

Dimensions inches (mm)

All tolerances ±0.005 (0.13) unless otherwise noted.

Speciﬁ cations subject to change without notice.

Applications

 Throttle position sensor

 Replacement for smart bearings

 PRNDL switch for harsh environments

 Steer wheel position for drive by wire systems

 Pedal position sensor