Data Sheet

ManualsBrandsZF ManualsActive ComponentsZF Hall effect sensor MP101401 4.5 - 18 V DC Reading range: 47 - 139 Gs Cable, open end

0.250±.030

(6.35±0.76)

ø0.115

(ø2.92)

See Detail A

Approximate

Sensing

Location

0.642

(16.31)

0.015

(0.38)

2X 45° X

0.020 (0.51)

0.855 (21.72)

0.120

(3.05)

0.228

(5.79)

0.680

(17.27)

Active Surface

0.115

(2.92)

2X R

0.130 (3.30)

0.075 (1.91)

Approximate

Label Location

0.324 (8.23)

47.8

2X R 0.104

(2.64)

0.105

(2.67)

0.210

(5.33)

Detail A

Leads = 24 AWG PVC UL1569, pre-tinned.

All tolerances 0.007 (0.18) unless otherwise noted.

12±0.75

(304.8±19.05)

Magnet

VCC

(red)

Pull-up

Resistor

Output

(green)

Ground

(black)

MP1014 Series

Digital Hall-effect position sensor in low-proﬁ le ﬂ ange-mount housing.

Features

 Capable of millions of operations

 Reverse Battery Protection to -24 V DC

 MP101401 south pole activated unipolar switching

 RoHS Compliant

 Latching versions available on special order basis

Speciﬁ cations

Part Number

Operating

Voltage Range

(VDC)

Supply

Current

(mA max.)

Output

Saturation Voltage

(mV max.)

Output

Current

(mA max.)

Operating

Temp Range

(°C)

Function

Operate

Point Gauss

(max.)

Release

Point Gauss

(min.)

MP101401

4.5 – 18 5.2 3-wire sink 400 20 – 40 to 85 Unipolar Switch 139 (south) 47 (south)

MAGNETIC SENSOR

Dimensions

inches (mm)

All tolerances ±0.005 (0.13) unless otherwise noted.

Speciﬁ cations subject to change without notice.

Open Collector

Sinking Block Diagram

Applications

 Door position sensing

 Flow sensing

 Pedal switch

Notes: These sensors require the use of an external pull-up resistor, the value of which is dependent on the supply voltage. See page 27 for recommendations.

Pull-up resistor should be connected between output (Green) and Vcc (Red).

Unipolar switch output turns low in presence of magnetic south pole. Bipolar latch output latches high in presence of magnetic south poles and latches low in presence of magnetic north pole.