ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. ZG FreeBox User Manual ZG FreeBox Introduction Push buttons introduction 1. Power switch button: press button and hold for 2 seconds to turn on or off the power of ZGFreeBox; ZGFreeBox label information 1. ZGFreeBox label information is as below ZG FreeBox Packing List Packing List 1. ZGFreeBox and data cable 2.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. ZG FreeBox Instructions Wireless router connect 1. Connect wireless router to main power: The indicator light on the router shows to main power white light, to be noticed, the input voltage should be 220V, Router working status Computer connect to router 1.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. Connect data cable to ZGFreeBox ①Input Voltage:25.2V ②USB Port 1. Connect the data cable to the ZGFreeBox as below. To be notice, the power data cable plug and the ZGFreeBox power data socket have red dots, please insert them correctly and completely. Confirm that the double red dots are on the same line.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. data cable connect to scanner Turn on the ZGFreeBox 1. Press power button hold for 2 seconds to turn on ZG FreeBox; ZG FreeBox working status Power Display 1. Turn on the ZGFreeBox, the display will light up and displaying real-time battery information, etc. To be notice, the full power voltage will be 25V, when power below 20V is required to recharge device.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. 2. Click the “Wireless Version” in the “option” interface, , and change the corresponding IP address in the software according to the IP information of the ZGFree Box label or router label; change the corresponding IP address in the software according to the IP address on the label. 3.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. connect to the ZGFree Box successfully. The function keys of the software will light up normally; 4.Display will showing “Ready” once connection successed. Software function 1. Please check RigelScan Elite unser manual Turn off ZG FreeBox 1. After the scanning process is completed, please turn off the ZGFree Box in time and save the power.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. ZGFree Box charging instructions ZGFree Box charging 1. Connect the power adapter to ZG FreeBox, the indicator light of the power adapter shows green. Afterwards, connect power adapter to main power, and the indicator light of the power adapter turn to red and charging is start.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. 2. In the code running interface, enter "ping-blank-IP address", the IP address should be the same as the ZGFree Box label or router label, and should be same as the ZGFreeBox IP address in the software; 3. Connection is normal as shown below, 4.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. IP address check 1. Checking to make sure the IP address in the software is identical and consistent with the address on the ZGFree Box label and router label; Software function check 1. Please replace the instrument and device files, restart the ZGFree Box, unplug all relevant data cables and power sockets, then restart the software; 2.
ZG TECHNOLOGY CO., LTD. BLD A17-3, NO.555, WenHua Ave, Hongshan District , Wuhan, China Tel: +0086 27 8774 1893 Web: www.zg-3d.com CO., LTD. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.