ZGEMMA H.
18 18 19 19 21 23 23 24 24 1.4A Micro SD card (TF card) Slot......4 25 25 25 ZGEMMA H.
H.
ZGEMMA H.
1.3 Product Descriptions Front Panel 1 2 3 5 4 6 7 1. On/off button: Using this button, you can switch between on and standby mode of your STB. 2. 7-Segment Display. 3. Indicator: Display the current status of STB. Green is on, Red is deep standby. 4. IR Receiver : Receive the IR signal from remote controller. 5. USB: One front USB is provided. 6. Smartcard reader slot : One Smartcard slot is provided. Rear Panel RF IN 1 2 3 4 5 6 7 8 9 1.
ZGEMMA H.2H ZGEMMA H.2H provides one Smartcard Reader slot. 1.4A Micro SD card (TF card) Slot and program etc. 2.Plug SD card should be in shut down state.
POWER MUTE Press to turn the product on or standby Press to mute the audio or un-mute NEXT Numeric Keys Press to go to Next Page Press to enter a channel number or nmbers according to the menu options INFO 2abc1凵.: PREVIOUS Press to view the Program information Press to go to Previous Page BACK Press to return to the previous service or Menu Navigation Keys Press to navigate up/down and left/right on the menu options. up/down keys are used to call up the channel list 1凵.
2 cores ·Micro SD card Slot RF range Modulation DVB-S2/DVB-T2/C standard LNB IN 1 port RF Micro SD card Slot IN 1 port x1(Right) 6
(2 cores) 7
1 Keys Power No ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.2H RF IN ZGEMMA H.2H ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H the language you want.
ZGEMMA H.
12
13
14
ZGEMMA H.
ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.
21
ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.
ZGEMMA H.
ZGEMMA H.2H ZGEMMA H.2H ZGEMMA H.2H www.zgemma.tv /zgemma/h3 directory /zgemma/h3/force /zgemma/h3/imageversion /zgemma/h3/kernel.bin /zgemma/h3/rootfs.bin ZGEMMA H.2H ZGEMMA H.2H Power up the ZGEMMA H.2H when the LED shows “USB” ,press power button. After about 3 minuties,upgrade will complete. Then ZGEMMA H.2H reboots automatically.
H.
Use SD card to record and play media file 1.Record movie and 1) Insert micro sd card. Insert micro sd card in watch channel thant symbol is up, screen display like picture press EXIT key. 2) Record Press RCU record key, screen display for the image on the left,press RCU key select ② press OK key, begin record the channel,record name is the current time and the channel name, the ext name is ts. 3) Stop record Press RCU record key repeat, according to the display select stop record the record work will stop.
