Operation Manual

1. On/off button: Using this button, you can switch between on and standby mode of your STB.

3. Indicator: Display the current status of STB. Green is on, Red is deep standby.

2. 7-Segment Display.

4. IR Receiver :

Receive the IR signal from r

emote controller.

5. USB: One front USB is provided.

6. Smartcard reader slot :

One Smartcard slot is provided.

1. DC Power Jack : Connect the provided AC/DC adapter (3A@12V).

3. Composite Video & Audio L/R: Connect to TV using AV cable. Yellow is Composite Video, Red is audio right, white is audio left

2. ON/OFF: Power switch.

4. S/PDIF: Connect to a digital audio system using S/PDIF cable.

5. Terrestrial antenna power switch: Turn on when using active antenna, turn off when using passive antenna.

6. RF IN/LOOP OUT: Connect to Terrestrial cable or Cable TV.

7. LNB IN : One Satellite cable can be connected.

8. HDMI : Connect to TV using a HDMI cable for both audio and video signals.

9. Ethernet & USB: One Ethernet cable and one USB device can be connected.

Front Panel

Rear Panel

1.3 Product Descriptions

RF IN

1 2 3 4 5 6 7 8 9