User's Manual

3-2. Fix the Main bracket on Locking plate by 4pcs⑨ .Insert
square tube (2pcs)into the holes of the conjunctive rack.Screw up the ⑧ plastic
head screws behind the conjunctive rack to fasten square tube .Finally, hang
TV brackets (2pcs) on the square tubes (make surethe horizontal space between
backets equal to the space of TV back cover ) and tighten them by ⑧ plastic
head screws. ( Diagram 2)
Flat Head Screw
M5*23mm
M5*28mm
Diagram 2
Diagram 3
Let the stamped lines on the
square tubes close to the edge
of conjunctive racks.
Stamped lines on
the square tubes
Main bracket
Locking plate
2 PE OP LE L IF T TH E
AS SE MB LY UN IT.
3-3. Screw up tabs ② (2pcs) to the upper holes of TV back cover by
① sink head screws (2pcs), The hang TV to the corresponding holes
on TV bracket by the tabs.Screw up TV brackets to the lower end of
TV back cover by ③ round head screw with④washer and ⑤ pad.
( Diagram 3)
Coding Key
LED Indicator
M6*10mm
Hook TV wall mount (with TV) to the hooking gap
of the mounting panel ,then tighten the lower end of
TV wall mount by⑧plastic head screws.
2 PE OPL E LI FT T HE
AS SEM BLY U NI T.
Power
supply
outlet
Diagram 4
3-4.Hang TV (with TV) to the hooking gap of the mounting
panel ,Then tighten the lower end of TVwall mount by plastic
head screws.(Diagram 4)
wall mount
⑧(2pcs)
This product can be controlled by
remote to adjust the angle
of TV to tilt up 10°and tilt down
15° turn left or right °
(Diagram 5)
sensor
, 15 .
4. .User 's Guide
4-1. Function
Turn left or right 15°
Tilt up
10°
Tilt down
15°
Diagram 5
4-2.1. Key Function
Left :Press the key the bracket will turn left.
Right: Press the key the bracket will turn right.
Up: Press the key the bracket will tilt up.
Down: Press the key the bracket will tilt down.
Return: Press the key the mount will come back to
the original positon.
Stop: Press the key the mount will stop in the course
of return.
4-2. Remote control(Diagram 6)
Left
Right
Tilt up
Return
Tilt
down
Stop
LED
Indicator
Diagram 6
Le
f
t
R
ig
h
t
U
p
R
etu
r
n
Dow
n
S
to
p
(4) (3)