In-Vehicle Display Terminal VT-7 GE User’s Manual Version 1.0.
Version 1.0.0 1.0.1 1.0.2 1.0.3 1.0.4 1.0.5 1.0.6 Release Time 20220407 20220422 20220511 20220518 20220520 20220528 20220621 Description Create Modified Modified Modified Modified Modified Modified Copyright Copyright © 3Rtablet Corp. All Rights Reserved. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
1. Introduction .................................................................................................. 1 1.1. Product Highlights ...............................................................................1 1.2. Parts of the Device ..............................................................................1 1.3. Extended Cable Definition .................................................................. 2 1.1.1. Standard Version .............................................................
Declaration of Conformity CE Specifications Hardware Version: LLP-BND-R70 V2.1 Software Version: full_tb8768p1_64_bsp-user.2022050917 release-keys Bluetooth Version: V5.0 Manufacturer：ZHANGZHOU 3RTABLET TECHNOLOGY CO., LTD Address：No.26 Fu Qi North Road, Long Wen District, Zhang Zhou, Fu Jian, China Importer：XXXXX Address：XXXXX FCC Class B This device complies with Part 15 of the FCC Rules.
safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Communicator has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 00mm from the body.
power source to avoid damage by transient over voltage. ► Never pour any liquid into openings. This may cause fire or electrical shock. ► If one of the following situations arises, get the equipment checked by service personnel: a. The power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped or damaged. f.
Return authorization must be obtained from the vendor before returned merchandise will be accepted. Authorization can be obtained by calling or emailing the account representative from vendor and requesting a Return Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear problem description.
User’s Manual 1. Introduction 1.1. Product Highlights ● MT8768 Octa-core A53 2.0GHz+1.5GHz ● Android 11.0 Operation System (GMS) ● Comply with IP67 rating ● WIFI, Bluetooth, LTE, GNSS and 5000mAh rechargeable battery supported ● 7 Inch IPS Display, physical 1280x800 resolution, 800cd/m², multi-point capacitive touch ● Portable with Docking Station 1.2.
User’s Manual 1.3. Extended Cable Definition 1.1.1.Standard Version NO.
User’s Manual P5 GPIO P6 USB P7 3 4 5 1 2 3 4 1 2 Output1 Orange Output2 Orange & white GND Black +5V Red DATA- White DATA+ Green GND Black SW Red GND Black 1.1.2.CANBUS Version NO.
User’s Manual P3 P4 DC P5 GPIO P6 USB P7 8 9 1 1 2 1 2 3 4 5 1 2 3 4 1 2 NC NC ACC Yellow Main power input 8~36V Red common GND Black Input1 Red Input2 Grey Output1 Orange Output2 Orange & white GND Black +5V Red DATA- White DATA+ Green GND Black SW Red GND Black 1.4. Specifications Durability Features IP67 Rating Certified 1.
User’s Manual NFC Camera Supports Type A,B, FeliCa, ISO15693 etc. Front: 5.0 megapixel camera(optional) Rear: 16.0 megapixel camera(optional) Mounting (optional) RAM Mount VESA Bracket 1.912 Inch RAM mount compatible (AMPS holes) VESA 75mm Folder Bracket Interface (standard version) Serial Port 2 x RS232 USB Port 1 xUSB2.0（Host）, 1 x USB TYPE-C(USB 2.0) SD Slot 1 x TF Card slot, Support up to 512G SIM Socket 1 x Micro SIM Card slot, 1.8v / 2.
User’s Manual Operating Humidity 40-75% (non-condensing) Dimensions (W x H x D) 207.4 x 137.4 x 30.1 mm Weight Tablet：766g Docking station：514g 2. Getting Started 2.1. Power On/Off and Sleep/Wake This Chapter is describing how to power on/off the device, put the device into sleep mode (screen saver) and force restart. Proper operation of power on/off the device will be beneficial to ensure the stability of the system.
User’s Manual on when VT-7GA/VT-7GE start up normally. 2. The first startup will enter the Google Setup wizard interface, which can be set according to the actual usage of the user. The setting items can be skipped. 3. Power on by connecting ACC, see the details in Chapter “3.2.5 Using ACC”. 4. Power consumption during operation：4w (typical) 2.1.2.Power off the Device 1.
User’s Manual 2.3. Charging the Battery The battery is partially drained during the transportation. Be sure to charge the battery to full when you are charging it for the first time. Tips: Please keep the DC in charging status at work if available.In order to ensure the life and performance of the battery, if your tablet has been stored in the warehouse for more than three months, it is recommended to charge the battery every three months. 2.3.1.
User’s Manual wiring is connected to a power supply above 5~36V, the docking station can keep supplying power to the tablet; When the Docking station is connected to 8~36V power supply, and the voltage of the ACC wiring drops from 5~36V to below 4V, the docking station will continue to supply power to the tablet for one hour, and then stop supplying power to the tablet.
User’s Manual 2.3.3.Installing/Replacing the Battery In case you need to install or replace the battery, follow the steps below to access the battery chamber and replace the battery. 1. Place the device on a flat surface, with the rear side facing up. Loosen the retaining screws on the back cover by using a Hexagon socket screwdriver with flat head. 2. To install a new battery, orient the new battery so that the contact pins are aligned correctly. 3.
User’s Manual Turn off the display if you are not using it. Turn off Wi-Fi, Bluetooth or GPS function if you are not using it. Set a battery protection plan to automatically turn on battery protection when the battery is below the set threshold. 3. Using VT-7GA/VT-7GE Function 3.1. Software Function 3.1.1.Virtual Button Find the “navigation_bar_show” switch button in the “Settings- 》 Accessibility- 》 System navigation” to control the display or hide the virtual buttons.
User’s Manual 3.1.2.Power Menu Find the following three function buttons in “Settings→Display”: 1. Power_Short_Long---Enable or disable the long press/short press function of the power button, which is off by default (not disabled). In order to improve the customer experience, after the power button function is disabled, the function of short-pressing the power button to wake up the screen is still retained when the tablet is in sleep mode). 2.
User’s Manual 3.1.3.Button Backlight Find the Lights switch in “Settings→ Display”. If the switch is turned on, the screen wakes up/off and the button backlight is on/off at the same time; if the switch is turned off, the button backlight is off whenever the screen is waked up or turned off. 3.1.4.Using Type-C Interface You can transfer files, such as pictures or audio files, between your computer and your device using the provided USB cable. 3.1.4.1.
User’s Manual 1. Turn on the USB debugging switch of the Android system of the tablet; 2. Disconnect the power supply of the docking station or leave the docking station switch in an open circuit state (this operation is required when the tablet is placed on the docking station). 3. Connect the USB cable to the Type-C port of the tablet. 3.1.4.2. File Transfer 1 Connect the device to the computer by using the Type-c cable, and it will show open the prompt message on the status bar.
User’s Manual 3.1.4.3. Use Instructions of USB TYPE-A If you want to use the USB TYPE-A function of the docking station, you need to ensure that the tablet and the docking station are in the following states: 1. The DC power supply of the docking station is connected 2. docking station Switch is closed circuit state 3. Disconnect the Type-C wiring of the device 3.2. Hardware Function 3.2.1.
User’s Manual 3. Receiving window, to display content received from corresponding COM port. 4. Sending window, to input content to be sent to corresponding COM port. 5. Baud rate. 6. on/off control of COM port. 7. Interval time setting for COM automatically send operation. 8. Auto send operation selection. 9. Single send button. 10. Counts of received character number of COMA and COMB. 11. Format selection of content to be sent and received. 12. button for clearing the receiving data area. 3.2.3.2.
User’s Manual A. The device has a dynamic IP by default, after connecting the router through the network cable, the bracket is powered on with DC power(refer to Note C), and the network port function can be used normally after waiting for 20s. B. If you need to connect to a static IP, click and enter to select a static IP C.
User’s Manual D. Fill in the IP address, subnet mask, DNS address, and gateway in the popup window, and then click “OK” to perform the same operation (refer to Note C), and then the network port function can be used normally after waiting for 20s. Note: A.
User’s Manual ACC voltage follow below 4V. IV. To shut down the tablet via ACC after a setting delay time once ACC voltage follow below 4V. V. Docking station will automatically cut off power supply to tablet if ACC has been disconnected or fall below 5V more than one hour. Note: If ACC signal recovers to above 5V, the delay time count will be cleared. 3.2.5.3.
User’s Manual 3.2.5.4. 1. 2. 3. 4. 5. ACC Settings ACC controls switch to turning off the screen and shut down the tablet; ACC switch to turn off the screen function; set the delay time to turn off the screen after ACC is disconnected; ACC switch to turn off the tablet; set the delay time for shutdown after ACC is disconnected. 3.2.6.GPIO 3.2.6.1. GPIO Lines Instruction Regarding the definition diagram of GPIO interface, please see the details in Chapter “1.3Extended Cable Definition”.
User’s Manual 3.2.6.2. GPIO Typical Connection The following figure is a typical connection method of GPIO. In order to ensure communicate normally, please connect the GPIO interface of VT7GA/VT-7GE as shown in the following figure. GPIO output GPIO Input GPIO Cable GPIO input GPIO Cable GPIO output GND GND GND Peripheral unit VT-7GA/VT-7GE 3.2.6.3.
User’s Manual 3.2.6.4. GPIO_DEMO Instruction a) Introduction This software is used for developing GPIO functions of device.
User’s Manual 1. 2. 3. 4. Name: means the Pin names of GPIO. Direction: means the input or output direction of the Pins. State: means the current level state of the GPIO Pins. Bracket installation detection: When the tablet is installed on the bracket, press "READ_IN", the status will change from 0 (the tablet is not connected to the bracket) to 1 (the tablet is detected to be connected to the bracket). 5. The button can read the value at once, when GPIO is set as the input direction. 6.
User’s Manual 3.2.7.
User’s Manual 3.2.8. Using NFC Function NFC setting path: setting>Connected devices>Connection preferences>NFC After activating NFC function and open NFC Tools App, place the NFC card close to the induction area (as Figure 1 shows). A prompt tone would be heard if the card is successfully identified. If the card contains some information (such as manufacturer’s information), there will be an interface popped up as shown in Figure 2.
User’s Manual Figure 2 4. Docking Station Using Instruction 4.1. Docking Station Install Steps 4.1.1 Align the VT-7GA/VT-7GE to the limit slot of docking station as Figure 1 shown. Figure 1 4.1.2 Pull the buckle up as the Figure 2 shown.
User’s Manual Figure 2 4.1.3 Push VT-7GA/VT-7GE to make it attached the docking via snap joint, as Figure 3 shown. Figure 3 4.1.4 Release and finish the installation as Figure 4 shown.
User’s Manual 4.2. Docking Station Disassemble Steps 4.2.1 Stretch upwards the buckle to release it from the device, as Figure 5 shown. Figure 5 4.2.2. Take out the device as Figure 6 shown. Figure 6 5. Accessories 5.1.
User’s Manual Allen Wrench Screws for RAM Screws for SIM card 1pc 4pc 2pc 5.2. Optional accessories 1. Docking Station Lock 2.
