User's Manual

6
User’s Manual
Operating Humidity
40-75% (non-condensing)
Dimensions
(W x H x D)
207.4 x 137.4 x 30.1 mm
Weight
Tablet：766g
Docking station：514g
2. Getting Started
2.1. Power On/Off and Sleep/Wake
This Chapter is describing how to power on/off the device, put the device into
sleep mode (screen saver) and force restart.
Proper operation of power on/off the device will be beneficial to ensure the
stability of the system. The device status indicated by the color of the indicator
is as described in the following table for the standard VT-7GA/VT-7GE.
Table 2.1.1 VT-7GA/VT-7GE Indicator color and device status table
Indicator LED status
Device Status
Power supply present
No power supply
present
Green
On: Full charged
Off: Charging
On: Power on
Off:Shutdown
Red
On: Charging
Off: Full charged
Off
Red or Green light
blinking
The device is abnormal, please cut off the external
power supply immediately and contact the factory.
Note:
1. After turning off, the Type-c of the tablet is connected to the 5V power
supply, and the percentage of battery charging can be seen by pressing the
tablet's power button.
2. By default, after the ACC is disconnected, the docking station will continue
to supply power to the tablet for one hour, and then disconnect the DC 5V
power supply to the tablet to save the consumption of the car battery after
shutdown.
3. if the NTC temperature of the battery exceeds 0~55 ℃, the tablet will stop
charging to ensure charging safety.
2.1.1.Power on the Device
1. Long press the power button for more than 2 seconds until the boot screen
displayed. It needs around 30 seconds to start the system. The indicator is