User's Manual

14
User’s Manual
1. Turn on the USB debugging switch of the Android system of the tablet;
2. Disconnect the power supply of the docking station or leave the docking
station switch in an open circuit state (this operation is required when the
tablet is placed on the docking station).
3. Connect the USB cable to the Type-C port of the tablet.
3.1.4.2. File Transfer
1 Connect the device to the computer by using the Type-c cable, and it will
show open the prompt message on the status bar. Refer to the following figure,
click “charging this device via USB” to expand other options.
2 Then select “File Transfer”.
3 On the computer find out the “Device” in “This PC”.