User's Manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Using VT-7GA/VT-7GE Function
- 4. Docking Station Using Instruction
- 5.Accessories
24
User’s Manual
3.2.7. CANBUS
The Main Interface Diagram of CANBUS
①Real-time display of received data values
②Calculate the data frame sent and the total time of the data frame
③Baud rate selection: serial port baud rate on the left, CAN baud rate on the right
④Sending frame number selection mode: only one frame is sent on the left, and the
set number of data frames is sent on the right
⑤Types of data frames sent: mainly extended frames and standard frames
⑥The format of sending data frame: data and Remote
⑦ID filter settings
⑧OTA upgrade mode
⑨Choose to turn on or turn off the serial port
⑩Clear real-time display
⑪The left is the setting of the total number of frames sent (users can set it by
themselves), and the right is to select whether the number of frames sent each time is
superimposed or not
⑫Delay between sending times, unit: ms
⑬The form setting of sending CAN data frame
⑭Delay between sending data frame interval, unit: ms
⑮The left is the mode to stop sending data frames, and the right is the mode to send
data frames