Quick Start Guide

Helmet
OPERATING INSTRUCTIONS
1110
*1 On Mode: press Left/Right/Go straight button to turn on the helmet;
Long press for 2 seconds, to turn off the helmet;*2 Off Mode:
receive remote control signal and execute signal as *3 Normal Mode:
instructed. After receiving off signal by the controller, all LED indicators
turn off and enter into OFF mode;
Sleep mode starts automatically after continuous7-day *4 Sleep mode:
helmet standby. For getting back to normal mode, helmet and remote
need to be matched: First, press the reset button on helmet with a needle,
all LED lights blinks quickly; Second, press the reset button on remote
control, LED lights on helmet are off indicating helmet and control are
matched.
*5 Charging mode: elmet charged by Micro USB
cable. LED lights flash while charging, and turns
off when fully charged;
press reset button to restart the *6 Reset button:
helmet;
powered by lithium battery with guard *7 Battery:
plate till power output cutoff after Undervoltage of
the guard plate. After Undervoltage protection,
charge it promptly to prevent battery from being
laid idle under Undervoltage for a long time. 4
hours are required to charge from under voltage
state to full charge. Continual use for over 8h is
available under double-flash state.
Right Turn SignalLeft Turn Signal