目录 1.产品参数、产品组成...................1 2.安装说明........................... ..........2-3 3 产品使用说明...............................3 4 设置操作...............................................4-6 6 售后保修...............................................
第 1 部分：产品参数简介 品 名：智能锁芯 型 号：C-001D 安全级别：顶级 适应门类型：防盗门、木门、玻璃门 适应门厚度：40mm----100mm 静电防护：15KV 电源输入：3.
产品设置： 使用说明： 请在进行以下操作前确保手机蓝牙已打开，并且手 机与门锁在合理的距离范围内，建议在 5 米内进行 操作 1、 APP 连接： 在应用市场搜索“涂鸦”APP 并下载 打开 APP 根据提示注册，在主页点击右上角“+”图 标 1.1、手动添加：点击左侧的“安防传感—门锁（蓝 牙）-确认已听到语音播报”，同时按设备上的 开启设备端蓝牙，等待几秒后，出现设备名称，点 击连接。 1.2、自动发现：点击上方“自动发现”，确保锁已 正常供电，同时按设备上的 开启设备端蓝牙, 等待几秒后，出现设备名，点击连接。 2、指纹管理 2.
纹，录入成功后弹出“指纹命名”，输入名称，添 加成功。 2.2、删除指纹：点击主页设备，进入管理界面，点 击“指纹-指纹管理”，点击已录入指纹右侧图标删 除。 3、密码管理 3.1、添加密码：点击主页设备后，进入管理界面， 点击“设置-密码管理-右上角+号添加密码”，选择 用户，根据页面提示输入密码、昵称，点击右上角 保存，添加成功。 3.2、删除密码：点击主页设备后，进入管理界面， 点击“设置-密码管理”，点击右侧图标删除。 4、成员管理 4.1、成员管理页面—两种不同的成员 4.1.1、家庭成员——该类成员与 app 中家庭组的用 户保持一致；在 app 家庭组中新增用户，在门锁成 员中也会对应的多出现一位家庭成员。同理，在门 锁家庭成员中新增一位家庭成员，在 app 的家庭组 中也会出现该成员。注：删除家庭成员只能在 app 的家庭成员管理中进行操作。 4.1.2、其他成员——指仅在门锁里出现的用户，不 是 app 家庭组的用户。添加、删除这类用户，不会 对 app 家庭组里的成员产生影响。 4.2、成员管理——其他成员管理 4.2.
的使用有效期长度。可以设置为永久有效，也可以 设置指定的开始时间—结束时间 4.2.2、开门方式。管理员可以决定该成员具备的开 门方式的权限类型；管理员如果关闭该成员的所有 开门权限，则该用户无法再通过 app 维护自己的开 门方式，只能使用已有的开门方式 4.2.3、创建一个其他成员后，管理员可以通过“分 享”操作，将该成员与 app 的某个用户建立关联。 到了该用户的指定结束时间，该用户的 app 会自动 失去该设备。 5、恢复出厂设置 点击主页设备，进入管理界面，点击右上角 图标， 进入界面后，往下拉找到恢复出厂设置，点击即可 5.1、当手机 app 与门锁进行蓝牙连接状态时，使用 恢复出厂设置操作。门锁本地的所有的开门方式都 会被删除，门锁恢复到刚出厂时候的默认状态，其 他用户可以通过 app 重新添加该门锁。 5.
7、开门操作： 按键盘上任意键一次，点亮键盘灯后，输入密码 + ，验证通过，门锁开，蓝灯亮，开门时间后， 门锁关，蓝灯灭。 按指纹，验证通过，门锁开，蓝灯亮，开门时间后， 门锁关，蓝灯灭。 打开 APP 主页，选择设备后，进入管理界面，点击 “手机开门-确定”，开锁成功。 打开 APP 主页,选择设备后，进入管理界面，左滑切 换到“动态密码”界面，点击“点击获取”，生成 动态密码，动态密码生成后 5 分钟内有效。在锁上 按键输入 8 位数字+ ，开锁成功。 8、开门记录查询 打开 APP 主页，选择设备进入管理界面，点击下方 “开门记录”，查看开门记录。 9、低电量报警: 电量低于 3.
按键后，灯亮十秒无操作自动退出操作系统，灯灭。 按返回键，退出系统，灯即灭。 售后保修： 一、售后保修： 1、7 天无理由退换货：自产品售出 7 天内，产品在 不影响 2 次销售情况下可选择无条件退换货。 2、15 天换货期：自产品售出 15 大内，产品不影响 2 次销售情况下可进行同款产品换货。 3、在三包有效期内，保修两次如出现仍不能正常使 用的产品，凭修理记录和证明，由销售人员为消费 者免费调换同型号同规格的产品或退货。 4、产品保修期 l 年. 5、售后邮费：保修期间产品邮寄费用由各自承担寄 出费用。 二、不属于保修范围： l、因操作不当、失误造成产品损坏，经检测属实. 产品维修人员按人工成本、零件成本收取相应的费 用。 2、因不可抗拒因素：雷击(正面袭击导致设备烧毁、 变形)浸水(长时间浸泡水中经检测出现产品毁坏)。 3、无法提供有效订单、收据、发票凭证的保修者.
产品售后保修： 产品型号： 出厂编号： 购买日期： 顾客姓名： 顾客电话： 通信地址： 维修记录 维修日期 故障原因 维修内容 维修人员签字
Part 1: Introduction to product parameters Name: Smart lock cylinder Model: C-001D Security level: top level Adapt to door type: security door, wooden door, glass door Adapt to the door thickness: 40mm----100mm Electrostatic protection: 15KV Power input: 3.
Product settings: Instructions for use: Please make sure that the mobile phone Blueto oth is turned on before the following operations, and the mobile phone and the door lock are within a reasonable distance. It is recommended to operate within 5 meters. 1, APP connection: Search for "tuya" app in the app market and do wnload Open the app and follow the prompts to register. Click on the "+" icon in the upper right corner o f the homepage. 1.1.
ait a few seconds, the device name appears, click on the connection. 2, fingerprint management 2.1. Add fingerprint: Click the home device name, enter the management interface, click “Settings-fi ngerprint management-upper right corner+numberadd fingerprint”, select the user, click “Start to co llect”, enter 3 fingerprints according to the prom pt, pop up after successful entry "Fingerprint na ming", enter the name, and add successfully. 2.2.
ice, enter the management interface, click “Settin gs-Password Management”, click the icon on the right to delete. 4, member management 4.1, member management page - two different m embers 4.1.1. Family members - These members are cons istent with the users of the family group in the app; new users are added to the app family gro up, and a family member is also present in the door lock members.
e other members The length of use of the validity period. Can be set to be permanent or set to the specified start time - end time 4.2.2, open the door. The administrator can deter mine the type of permission that the member ha s to open the door; if the administrator closes al l the opening rights of the member, the user can no longer maintain the door opening mode thro ugh the app, and can only use the existing door opening mode. 4.2.3.
ctory reset operation. All the door opening meth ods of the door lock will be deleted, the door lo ck will be restored to the factory default state, a nd other users can re-add the door lock through the app. 5.2. When the mobile phone is not in Bluetooth connection with the door lock, the door lock is r estored to the factory setting operation on the d oor lock. The way the door is opened on the do or lock remains unaffected.
the door lock is closed and the blue light is off. Open the APP homepage, select the device, enter the management interface, click "Mobile phone open OK", unlock successfully. Open the APP homepage, select the device, enter the management interface, left to switch to the "Dynamic Password" interface, click "Click to get" to generate a dynamic password, valid within 5 minutes after the dynamic password is generated. Enter the 8-digit number + on the lock button, and the unlock is successful.
he button light is off After the button is pressed, the light is on for ten seconds without operation and automatically exits the operating system, and the light is off. Press the Back button to exit the system and the light will go out. After-sales warranty: 1, 7 days no reason to return: from the product sold within 7 days. The product can be selected unconditionally returned without affecting second times sale. 2, 15 days replacement period: 15 days from the sale of the product.
2, Due to irresistible factors: lightning strikes (frontal attacks lead to equipment burned, deformed) flooding (long-term soaking water detected product damage). 3. Warrants who cannot provide valid orders, receipts, and invoice vouchers. 4. beyond the warranty period, and spare parts are required for irresistible damage to the product during the warranty period. A manual service fee plus spare parts fee is required.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
number: contact address: Maintenance records Repair date Causeof the malfunction Repair Signature of content maintenance personnel
